top of page
Rainy HORIZONTAL FL V-Wire Screen

Rainy HORIZONTAL FL V-Wire Screen

SKU: HZTVWIRE
₹19,500.00Price

Specialized Non-Clogging SS 304 Food Grade Material, ‘V’ Wire Screen Filter can be fitted at Horizontal Angle to trap the debris inside the Silt trap unit of both direct re charge and Indirect recharge structures.


In ‘V’ wire Technology, inside the silt trap unit, a sufficient volume of space is created in the form of reinforced concrete rings filled with filtration media at the bottom which allows for the dirt and debris to remain at the bottom and allows clean water to pass through the horizontally placed V wire screen mesh leading to the Injection well.
 
In  ‘V’ wire Technology the depth of the recharge point varies from a minimum of 20 meters and may go up to 60 meters depending on the geomorphic characteristics of the soil profile. Because of this depth in recharging; the water gets self-purified and reduces the salinity, hardness, and fluoride contents. In ‘V’ Wire technology 20% of space uses high-quality filtration media at the top and 80% of space is earmarked to store the runoff water. This enables the system to hold large quantities of runoff rainwater to be held within the system and secondly, this large volume of water column exerts an additional water pressure discharging large amounts of water into the deeper layers of the earth's aquifer.
 
Rainy technology employs scientifically tested electrical conductivity tests to accurately determine the most favorable points for the quick release of rainwater into the deeper layers of permeable strata.

  • Product Details

    o Suitable up to ground area : 1 to 8acres
    o Minimum/Maximum Intensity of rainfall : 12.5MM to 75MM per hour
    o Working Principle : Gravitational Water column Pressure
    o Operating Pressure : 0.05Kg/cm2to0.6kg/cm2
    o Percolation capacity : 25,000 liters to 50,000 Liters/Day (minimum)
    o Filter Unit for Injection well : SS 304 V-Wire Screen
    o Slot Size : 0.75MM
    o Discharge capacity of V Wire : 5 To 20 LPS
    o Percolator Pipe : 8MM perforated Holes drilled circumferentially and staggered at 30MM Intervals on 140MM Dia HDPE pipe surface.

    o Diameter of the Injection Well : 1350MM to 2100MM
    o Depth of the Injection well : 5 to 6MTRS
    o Diameter of the Recharging bore : 225MM
    o Depth of the Recharging Bore : 20 to 60MTRS depending permeable layer
    o Diameter of the SILT Trap unit : 1000 to 1350MM
    o Depth of Silt Trap unit : 1to2 MTRS
    o Diameter of Filter Unit for silt Trap Unit : SS-304 Horizontal Mount- 150 to 200MM- Slot Size:3 mm

bottom of page